Panasonic PT-DZ770E Operating Instructions Manual page 121

Model No.
<RGB 1 IN>
terminal
<RGB 2 IN>
terminal
<DVI-D IN> terminal
Terminals
<HDMI IN> terminal
<VIDEO IN> terminal 1 set, BNC 1.0 V [p-p] 75 Ω
<S-VIDEO IN> terminal 1 set, Mini DIN 4 p Y 1.0 V [p-p], C 0.286 V [p-p] 75 Ω S1 signal compatible
<SERIAL IN>/
<SERIAL OUT>
terminal
<REMOTE 1 IN>/
<REMOTE 1
OUT> terminal
<REMOTE 2 IN>
terminal
<LAN> terminal
Power cable length
Outer case
Dimensions
Weight
Operating environment
Power supply
Operating range
Remote
control
Weight
Dimensions
*1: Value for the supplied standard zoom lens. The value varies depending on the lens. The indicated value is an average value
of the overall projector at factory default, and is written in accordance with the specification form of the JIS X 6911:2003 data
projector. Measurement methods and measuring conditions comply with Appendix 2.
*2: The size is maximum 200" when ET-DLE055 lens is used.
*3: Average value. Weight varies for each product.
*4: When using the projector at high altitudes (1 400 m (4 593 ft) – 2 700 m (8 858 ft) above sea level), the operating environment
temperature will be 5°C (41°F) lower than the maximum limit. In addition, when the projector is used with the following two
settings, if the ambient temperature exceeds 40°C (104°F) (35°C (95°F) in [HIGH ALTITUDE MODE]), light output is sometimes
reduced by 20% to protect the projector.
– When [LAMP SELECT] is set to [DUAL] in the menu
– When [LAMP POWER] is set to [NORMAL] in the menu
z The model numbers of accessories and optional components are subject to change without notice.
PT-DZ770E
1 set (BNC x 5)
RGB signals 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
YP P signals Y: 1.0 V [p-p] including synchronization signal, P
B R
1 set, high-density D-Sub 15p (female)
RGB signals 0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
YP P signals Y: 1.0 V [p-p] including synchronization signal, P
B R
1 set, DVI-D 24 p single link, DVI 1.0 compatible, HDCP compliant
1 set, HDMI 19 pin, (HDCP and Deep color compatible)
D-Sub 9 p, each set, RS-232C compatible, for computer control
M3 stereo mini jack, each set for remote control (wired)/for projector serial control
1 set D-Sub 9 p (female) for contact control
1 set, (for RJ-45 network connection, PJLink compatible, 10Base-T/100Base-TX)
Width: 498 mm (19-19/32")
Height: 175 mm (6-7/8")
(with minimum feet length)
Depth: 466 mm (18-11/32")
(including the standard zoom lens)
Approx 16.3 kg (35.9 lbs.)
(including the standard zoom lens)
Operating environment temperature
Operating environment humidity: 20% to 80% (no condensation)
Within 30 m (98'5") (when operated directly in front of signal receiver)
Width: 51 mm (2") Height: 176 mm (6-15/16") Depth: 22.7 mm (29/32")
3.0 m (118-1/8")
Molded plastic
Width: 498 mm (19-19/32")
Depth: 423 mm (16-21/32")
*3
: 0°C (32°F) to 45°C (113°F)
*4
DC 3 V (AA/R6 battery x 2)
134 g (4.7 ozs.)(including batteries)
Specifications
PT-DZ770EL
P : 0.7 V [p-p] 75 Ω
B R
P : 0.7 V [p-p] 75 Ω
B R
Height: 175 mm (6-7/8")
(with minimum feet length)
Approx 15.4 kg (34 lbs.)
*3
ENGLISH - 121