Start-Up Display - Panasonic PT-DZ770E Operating Instructions Manual

Start-up display

Start-up display
The initial setting screen is displayed when the projector is switched on for the first time after purchase as well as
when [INITIALIZE] – [ALL USER DATA] (
In other occasions, you can change the settings by menu operations.
Note
z When the projector is used for the first time, you may be required to adjust the focus, zoom, and shift to display
the menu screen clearly.
Refer to "Adjusting the focus, zoom, and shift" (
■ Initial setting (display language) ▶
Select the language to show on the screen.(
1) Press ▲▼ to select the display
language.
2) Press the <ENTER> button to proceed
to the initial setting.
18 - ENGLISH
page 74) is executed. Set them in accordance with circumstances.

page 39) for details.

■ Initial setting (projector setup) ▶
page 57) Set each item.

1) Press ▲▼ to select an item.
2) Press ◀▶ to switch the setting.
Refer to the following page for details of each
item.
▶
z [PROJECTION METHOD] (
▶
z [COOLING CONDITION] (
▶
z [SCREEN FORMAT] (
▶
z [SCREEN POSITION] (
▶
z [HIGH ALTITUDE MODE] (
3) Press the <ENTER> button.
▶
z Confirm the setting value to complete the initial
setting.
Note
z If you press the <MENU> button in the initial setting
(projector setup) screen, you can go back to the
initial setting (display language) screen.
INITIAL SETTING
PROJECTION METHOD FRONT/FLOOR
COOLING CONDITION FLOOR SETTING
SCREEN FORMAT 16 10
SCREEN POSITION
HIGH ALTITUDE MODE OFF
SWITCH TO HIGH ALTITUDE MODE "ON"
IF OVER 1400m (4593Ft).
MENU SELECT CHANGE
SET
ENTER


page 60)

page 60)


page 66)
page 67)
page 67)