[NETWORK] menu
■ [Adjust clock] page
▶
Click [Detailed set up] → [Adjust clock].
Note
z The replacement of the battery inside the projector is required when the time goes out of alignment right after
correcting the time. Please consult your dealer.
■ [Ping test] page
▶
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] → [Ping test].
92 - ENGLISH
(1) [Time Zone]
Select the time zone.
(1)
(2) [Set time zone]
Updates the time zone setting.
(3) [NTP SYNCHRONIZATION]
(2)
Set to [ON] to adjust the date and time automatically.
(4) [NTP SERVER NAME]
Enter the IP address or server name of the NTP
server when you set to adjust the date and time
(3)
manually.
(4)
(To enter the server name, the setup of the DNS
(5)
server is required.)
(6)
(5) [Date]
Enter the date to be changed.
(7)
(6) [Time]
Enter the time to be changed.
(7) [Set date and time]
Updates the date and time settings.
(1) [Input IP address]
Enter the IP address of the server to be tested.
(2) [Submit]
Executes the connection test.
(1)
(2)
(3) Example of display when the connection has
succeeded
(4) Example of display when the connection has
(3)
failed
(4)