[Text Change]; [Menu Lock]; [Menu Lock Password]; [Control Device Setup] - Panasonic PT-DZ770E Operating Instructions Manual

[SECURITY] menu

[TEXT CHANGE]

Change the text displayed when the text display is
enabled by selecting [TEXT] in [DISPLAY SETTING].
1) Press ▲▼ to select [TEXT CHANGE].
2) Press the <ENTER> button.
▶
z The [TEXT CHANGE] screen is displayed.
3) Press ▲▼◀▶ to select the text, and
press the <ENTER> button to enter the
text.
▶
z Maximum 22 characters can be input.
4) Press ▲▼◀▶ to select [OK] and
press the <ENTER> button.
▶
z The text is changed.

[MENU LOCK]

Display the menu with the <MENU> button, and set
whether to enable menu operations.
1) Press ▲▼ to select [MENU LOCK].
2) Press ◀▶ to switch [MENU LOCK].
▶
z The setting will change as follows each time
you press the button.
[OFF]
Cancels the lock on menu
[OFF]
operations.
[ON] Locks menu operations.
Note
z After setting [MENU LOCK] to [ON], if the wrong
password is input, the <MENU> button cannot be
operated.
z At the time of purchase or after [ALL USER DATA]
initialization, [MENU LOCK] is set to [OFF].
z The lock release is maintained until the projector
enters standby.
80 - ENGLISH
Change the menu lock password.
1) Press ▲▼ to select [MENU LOCK
2) Press the <ENTER> button.
3) Press ▲▼◀▶ to select the text, and
4) Press ▲▼◀▶ to select [OK], and
z The initial password when used for the first time or
z Change the password periodically that is hard to
Enable/disable the button operations on the control
[ON]
panel and the remote control.
1) Press ▲▼ to select [CONTROL
2) Press the <ENTER> button.
3) Press ▲▼ to select [CONTROL
4) Press the <ENTER> button.
■ [CONTROL PANEL]

[MENU LOCK PASSWORD]

PASSWORD].
▶
z The [MENU LOCK PASSWORD] screen is
displayed.
press the <ENTER> button to enter the
text.
▶
z Maximum 16 characters can be input.
press the <ENTER> button.
▶
z To cancel, select [CANCEL].
Attention
after initializing all the user data is "AAAA".
guess.

[CONTROL DEVICE SETUP]

DEVICE SETUP].
▶
z The [CONTROL DEVICE SETUP] screen is
displayed.
PANEL] or [REMOTE CONTROL].
▶
z The [CONTROL PANEL] screen or the
[REMOTE CONTROL] screen is displayed.
▶
▶
z You can set the limitation on the control from
the control panel.
Enables all button operations from
[ENABLE]
the projector body.
Disables all button operations from

[DISABLE]

the projector body.