Removing/attaching a projection lens
Removing/attaching a projection lens
Attach and remove the projection lens in the same way as a standard zoom lens and optional accessories.
Move the projection lens to the home position before replacing or removing the lens. (
Attention
z Replace the projection lens after turning off the power of the projector.
z Do not touch the lens signal receiver. Dust or dirt may cause defective contact.
z Do not touch the lens surface with your bare hands.
z Before attaching the projection lens, remove the lens cover attached to the projection lens.
z The procedure to remove/attach a projection lens cover differs for the ultra-short focus zoom lens (ET-DLE080).
Refer to the user manual provided with ET-DLE080 for details.
Removing the projection lens
1) Turn the projection lens cover counterclockwise to remove.
2) While pressing the lens release button, turn the projection lens counterclockwise
until it stops. Remove the projection lens.
Attention
z Store the removed lens where it will be free from vibration and impact.
30 - ENGLISH
Projection lens cover
(i)
(iii)
(ii)
(i)
Lens release button
(ii)
Projection lens
page 40)