▶
z[User] account
▶
z[Change password] (when accessed by user rights)
Only the change of password is enabled under the user rights.
Note
z To change the account of the administrator, you must enter the [Current] [User name] and [Password].
[NETWORK] menu
(1) [Account]
Displays the account to change.
(1)
(2) [New] [User name]
Enter the desired new user name. (Up to 16 characters
in single byte)
(2)
(3) [New] [Password]
(3)
Enter the desired new password. (Up to 16 characters
in single byte)
(4)
(4) [New] [Password(Retype)]
(5)
Enter the desired new password again.
(5) [OK]
Determines the change of password.
(1) [Old Password]
Enter the current password.
(2) [New Password]
Enter the desired new password. (Up to 16 characters
in single byte)
(1)
(3) [Retype]
(2)
Enter the desired new password again.
(3)
(4) [OK]
Determines the change of password.
(4)
ENGLISH - 99