[Security] Menu; [Security Password]; [Security Password Change]; [Display Setting] - Panasonic PT-DZ770E Operating Instructions Manual

[SECURITY] menu

Select [SECURITY] from the main menu, and
select the item from the sub-menu.
Refer to "Navigating through the menu"
( page 44) for the operation of the menu

screen.
z When the projector is used for the first time
Initial password: Press ▲▶▼◀▲▶▼◀ in
order, and press the <ENTER> button.
z After selecting the item, press ▲▼◀▶ to set.
Attention
z When you select the [SECURITY] from the main
menu and press the <ENTER> button, entering a
password is required. Enter the set password and
then continue operations of the [SECURITY] menu.
z When the password has been changed previously,
enter the changed password, and press the
<ENTER> button.
Note
z The entered password is displayed with * mark on
the screen.

[SECURITY PASSWORD]

The [SECURITY PASSWORD] screen is displayed
when the power is turned on. When the entered
password is incorrect, the operation will be restricted
to the power standby < > button, the <SHUTTER>
button, and the <LENS> (<FOCUS>, <ZOOM>, and
<SHIFT>) buttons.
1) Press ▲▼ to select [SECURITY
PASSWORD].
2) Press ◀▶ to switch [SECURITY
PASSWORD].
▶
z The setting will change as follows each time
you press the button.
[OFF]
[OFF] Disables the security password entry.
[ON] Enables the security password entry.
Note
z The [SECURITY PASSWORD] setting is set to
[OFF] at the time of purchase or when all the user
data has been initialized.
z Change the password periodically that is hard to
guess.
z The security password will be enabled after setting
[SECURITY PASSWORD] to [ON] and turning the
<MAIN POWER> switch to <OFF>.
Change the security password.
1) Press ▲▼ to select [SECURITY
2) Press the <ENTER> button.
3) Press ▲▼◀▶ and the number (<0> to
4) Press the <ENTER> button.
5) Re-enter the password for the
6) Press the <ENTER> button.
z The entered password is displayed with * mark on
z An error message is displayed on the screen when
Overlap the security message (text or image) over the
projecting image.
1) Press ▲▼ to select [DISPLAY
2) Press ◀▶ to switch [DISPLAY
[ON]
z To create the image for [USER LOGO], "Logo
[SECURITY] menu
[SECURITY PASSWORD
CHANGE]
PASSWORD CHANGE].
▶
z The [SECURITY PASSWORD CHANGE]
screen is displayed.
<9>) buttons to set the password.
▶
z Up to eight button operations can be set.
confirmation.
Note
the screen.
the entered password is incorrect. Re-enter the
correct password.

[DISPLAY SETTING]

SETTING].
SETTING].
▶
z The setting will change as follows each time
you press the button.
[OFF] [TEXT]
[OFF] The text display is disabled.
[TEXT] The text display is enabled.
The picture registered by the user
[USER LOGO]
is projected.
Note
Transfer Software" included in the supplied CD-
ROM is required.
[USER LOGO]
ENGLISH - 79