Configuring Port Binding - ZyXEL Communications P-660H-61 User Manual

Configured WAN connections can be viewed by clicking the More Connections tab under Network
> WAN. See the WAN Setup chapter
WAN connections and ATM QoS settings.

4.10.2 Configuring Port Binding

You can then group specific WAN PVCs with LAN ports or WLANs, so traffic from these ports is
forwarded through specific WAN PVCs. In the configuration shown below, the WAN connections set
up in the previous section are bound as follows:
Table 6 Port Binding Groups
GROUP INDEX
0
1
2
Access the port binding screen by clicking Advanced > Port Binding, and select Activated to
turn on the port binding feature. Specify the Group Index and select the ports to include in the
port binding group. Click Apply to save the settings. The configured groups can be viewed by
clicking the Port Binding Summary button. See the Port Binding chapter
199) for more details on configuring port binding.
ADSL Router Series User's Guide
(Chapter 6 on page
WAN CONNECTION
PVC0 - for Data
PVC1 - for VoIP
PVC2 - for MOD
93) for more information on configuring
LAN PORT
eth1, eth2, AP0, AP1, AP2
eth3
eth4
(Chapter 14 on page
Chapter 4 Tutorials
67