What You Need To Know About Remote Management; The Www Screen - ZyXEL Communications P-660H-61 User Manual

Chapter 18 Remote Management
• Your ZyXEL Device can act as an SNMP agent, which allows a manager station to manage and
monitor the ZyXEL Device through the network. Use the SNMP screen (see
223) to configure through which interface(s) and from which IP address(es) users can use SNMP
to access the ZyXEL Device.
• Use the DNS screen
from which IP address(es) users can send DNS queries to the ZyXEL Device.
• Use the ICMP screen
respond to pings and probes for services that you have not made available.
• Use the SSH screen
which IP address(es) users can use SSH to manage the ZyXEL Device.

18.1.2 What You Need to Know About Remote Management

Remote Management Limitations
Remote management does not work when:
• You have not enabled that service on the interface in the corresponding remote management
screen.
• You have disabled that service in one of the remote management screens.
• The IP address in the Secured Client IP Address field does not match the client IP address. If
it does not match, the ZyXEL Device will disconnect the session immediately.
• There is a firewall rule that blocks it.
Remote Management and NAT
When NAT is enabled:
• Use the ZyXEL Device's WAN IP address when configuring from the WAN.
• Use the ZyXEL Device's LAN IP address when configuring from the LAN.

18.2 The WWW Screen

Use this screen to specify how to connect to the ZyXEL Device from a web browser, such as Internet
Explorer.
220
(Section 18.6 on page 225) to configure through which interface(s) and
(Section 18.7 on page
(Section 18.8 on page 227) to configure through which interface(s) and from
226) to set whether or not your ZyXEL Device will
ADSL Router Series User's Guide
Section 18.5 on page