Ipv6 Static Route Edit - ZyXEL Communications P-660H-61 User Manual

13.2.3 IPv6 Static Route Edit

Use this screen to configure the required information for an IPv6 static route. Select an IPv6 static
route index number and click Edit. The screen shown next appears.
Figure 95 Advanced > Static Route > IPv6 Static Route: Edit
The following table describes the labels in this screen.
Table 68 Advanced > Static Route > IPv6 Static Route: Edit
LABEL
Static Route Setup
Destination IPv6
Address
IPv6 Prefix Length Enter the address prefix to specify how many most significant bits compose the network
Gateway IPv6
Address
PVC IPv6 Address
Back
Apply
Cancel
ADSL Router Series User's Guide
DESCRIPTION
This parameter specifies the IP network address of the final destination. Routing is always
based on network number. If you need to specify a route to a single host, use a prefix
length of 128 in the prefix length field to force the network number to be identical to the
host ID.
address.
Enter the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward packets to
their destinations.
Select the interface through which the traffic is routed.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 13 Static Route
197