The Wps Screen - ZyXEL Communications P-660H-61 User Manual

Table 34 Network > Wireless LAN > More AP: Edit
LABEL
Apply
Cancel

8.4 The WPS Screen

Use this screen to configure WiFi Protected Setup (WPS) on your ZyXEL Device.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS.
Click Network > Wireless LAN > WPS. The following screen displays.
Figure 49 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 35 Network > Wireless LAN > WPS
LABEL
WPS Setup
WPS Setup
WPS Status
ADSL Router Series User's Guide
DESCRIPTION
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
Select the check box to activate WPS on the ZyXEL Device.
This displays Configured when the ZyXEL Device has connected to a wireless network
using WPS or Enable WPS is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there is no wireless or wireless
security changes on the ZyXEL Device or you click Release to remove the configured
wireless and wireless security settings.
Chapter 8 Wireless LAN
133