The Ftp Screen - ZyXEL Communications P-660H-61 User Manual

Chapter 18 Remote Management
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 111 Advanced > Remote MGMT > Telnet
The following table describes the labels in this screen.
Table 82 Advanced > Remote Management > Telnet
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Cancel

18.4 The FTP Screen

You can use FTP (File Transfer Protocol) to upload and download the ZyXEL Device's firmware and
configuration files. Please see the User's Guide chapter on firmware and configuration file
maintenance for details. To use this feature, your computer must have an FTP client.
222
DESCRIPTION
This displays the service port number for accessing the ZyXEL Device. If the number is
grayed out, it is not editable.
Select the interface(s) through which a computer may access the ZyXEL Device using this
service.
Note: It is recommended if you are allowing WAN access even temporarily to change the
default password (in Maintenance > System > General). To allow access from the
WAN, you will need to configure a WAN to Router firewall rule. See
page 60 for information on configuring firewall rules.
A secured client is a "trusted" computer that is allowed to communicate with the ZyXEL
Device using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
Section 4.8 on
ADSL Router Series User's Guide