ZyXEL Communications P-660H-61 User Manual page 205

Note: If the WAN interface in the VLAN group is not the default router, you need to create
a static route to communicate with the WAN.
Figure 100 Advanced > 802.1Q/1P > Group Setting
The following table describes the labels in this screen.
Table 71 Advanced > 802.1Q/1P > Group Setting
LABEL
802.1Q/1P
Active
Summary
#
Active
VID
Port Number
Modify
Apply
Cancel
ADSL Router Series User's Guide
DESCRIPTION
Select this check box to activate the 802.1P/1Q feature.
This field displays the index number of the VLAN group.
This field displays whether 802.1P/1Q is active for the VLAN group.
This field displays the ID number of the VLAN group.
These columns display the VLAN's settings for each port. A tagged port is marked as
T, an untagged port is marked as U and ports not participating in a VLAN are marked
as "–".
Click the Edit button to configure the ports in the VLAN group.
Click the Remove button to delete the VLAN group.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 15 802.1Q/1P
205