Customized Services; Configuring A Customized Service - ZyXEL Communications P-660H-61 User Manual

Chapter 10 Firewall
Table 53 Security > Firewall > Rules > Add
LABEL
Apply
Cancel

10.5.2 Customized Services

Note: The firewall configuration screen shown in this section is specific to the following
devices: P-660HNU-Tx, P-660HU-Tx devices.
Configure customized services and port numbers not predefined by the ZyXEL Device. For a
comprehensive list of port numbers and services, visit the IANA (Internet Assigned Number
Authority) website. See
Services link while editing a firewall rule to configure a custom service port. This displays the
following screen.
Figure 76 Security > Firewall > Rules: Edit: Edit Customized Services
The following table describes the labels in this screen.
Table 54 Security > Firewall > Rules: Edit: Edit Customized Services
LABEL
No.
Name
Protocol
Port
Modify
Add
Back

10.5.3 Configuring a Customized Service

Note: The firewall configuration screen shown in this section is specific to the following
devices: P-660HNU-Tx, P-660HU-Tx devices.
172
DESCRIPTION
Click this to save your changes.
Click this to restore your previously saved settings.
Appendix F on page 351
DESCRIPTION
This is the number of your customized port.
This is the name of your customized service.
This shows the IP protocol (TCP or UDP) that defines your customized service.
This is the port number or range that defines your customized service.
Click this to go to the Firewall Customized Services Config screen to edit a customized
service.
Click this to go to the Firewall Customized Services Config screen to configure a
customized service.
Click this to return to the Firewall Edit Rule screen.
for some examples. Click the Edit Customized
ADSL Router Series User's Guide