Thomas may set up the port settings by configuring the port settings for the Doom server computer
(see
Section 9.3 on page 153
Click Network > NAT > Port Forwarding and in the Service Name field select User Define.
1
Configure the screen with the following values:
Service Name
Start/End Port/s
Server IP Address
The screen should look as follows. Click Apply.
2
The port forwarding settings you configured appear in the table. The ZyXEL Device forwards port
3
666 traffic to the computer with IP address 192.168.1.34.
Players on the Internet then can have access to Thomas' Doom server.
ADSL Router Series User's Guide
for more information).
Doom_Server
Enter 666 as the Start and End port.
Enter the IP address of the Doom server. This is 192.168.1.34 for this
example.
Chapter 4 Tutorials
59