Configuring More Connections Advanced Setup - ZyXEL Communications P-660H-61 User Manual

Table 19 Network > WAN > More Connections: Edit (continued)
LABEL
IPv6 Default Gateway
IPv6 DNS Server1
IPv6 DNS Server2
Connection
Nailed-Up Connection
Connect on Demand
Max Idle Timeout
NAT
Back
Apply
Advanced Setup

6.3.2 Configuring More Connections Advanced Setup

Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the Advanced Setup
button in the More Connections Edit screen. The screen appears as shown.
Figure 32 Network > WAN > More Connections: Edit: Advanced Setup
ADSL Router Series User's Guide
DESCRIPTION
If Static IP Address is enabled, enter the IPv6 address of the default gateway
If Static IP Address is enabled, enter the primary DNS server IPv6 address for
the ZyXEL Device.
If Static IP Address is enabled, enter the secondary DNS server IPv6 address for
the ZyXEL Device.
Select Nailed-Up Connection when you want your connection up all the time.
The ZyXEL Device will try to bring up the connection automatically if it is
disconnected.
Select Connect on Demand when you don't want the connection up all the time
and specify an idle time-out in the Max Idle Timeout field.
Specify an idle time-out in the Max Idle Timeout field when you select
Connect on Demand. The default setting is 0, which means the Internet
session will not timeout.
SUA only is available only when you select Routing in the Mode field.
Select SUA Only if you have one public IP address and want to use NAT. Click
Edit Detail to go to the Port Forwarding screen to edit a server mapping set.
Otherwise, select None to disable NAT.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to display the More Connections Advanced Setup screen and edit
more details of your WAN setup.
Chapter 6 WAN Setup
103