ZyXEL Communications P-660H-61 User Manual page 37

Table 3 Status Screen
LABEL
DSL Firmware
Version
WAN Information
DSL Mode
Annex Type
IP Address
IP Subnet Mask
Default
Gateway
Primary DNS
Secondary DNS
IPv6 Address
IPv6 Prefix
Length
IPv6 Default
Gateway
IPv6 Primary
DNS
IPv6 Secondary
DNS
Link Local
address
IPv4/IPv6 MTU
VPI/VCI
LAN Information
IP Address
IP Subnet Mask
IPv6 Address
IPv6 Prefix
Length
IPv6 Prefix
IPv6 Global IP
DHCP
IPv6 LAN DNS1
ADSL Router Series User's Guide
DESCRIPTION
This is the current version of the device's DSL modem code.
This is the DSL standard that your ZyXEL Device is using.
This is the ADSL Annex Type that your ZyXEL Device is using.
This is the current IP address of the ZyXEL Device in the WAN. Click this to go to the
screen where you can change it.
This is the current subnet mask in the WAN.
This is the IP address of the default gateway, if applicable.
This is the primary DNS server IP address assigned to the ZyXEL Device.
This is the secondary DNS server IP address assigned to the ZyXEL Device.
This is the current IPv6 address of the ZyXEL Device in the WAN. Click this to go to the
screen where you can change it.
This is the current IPv6 prefix length in the WAN.
This is the IPv6 address of the default gateway, if applicable.
This is the primary DNS server IPv6 address assigned to the ZyXEL Device.
This is the secondary DNS server IPv6 address assigned to the ZyXEL Device.
This is the link local address assigned to the ZyXEL Device within the LAN.
This is the MTU (Maximum Transmission Unit) for IPv4 and IPv6 packets passing
through the WAN interface.
This is the Virtual Path Identifier and Virtual Channel Identifier that you entered in the
wizard or WAN screen.
This is the current IP address of the ZyXEL Device in the LAN. Click this to go to the
screen where you can change it.
This is the current subnet mask in the LAN.
This is the current IPv6 address of the ZyXEL Device in the LAN. Click this to go to the
screen where you can change it.
This is the current IPv6 prefix length in the LAN.
This is the current IPv6 prefix in the LAN.
This is the current global IPv6 address of the ZyXEL Device.
This field displays what DHCP services the ZyXEL Device is providing to the LAN.
Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP addresses to
other computers in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays DHCP requests
and responses between the remote server and the clients.
None - The ZyXEL Device is not providing any DHCP services to the LAN.
Click this to go to the screen where you can change it.
This is the first DNS server IPv6 address the ZyXEL Device passes to the DHCP clients.
Chapter 3 Status Screens
37