Wan Setup; Chapter 6 Wan Setup; Overview; What You Can Do In The Wan Screens - ZyXEL Communications P-660H-61 User Manual

6.1 Overview

This chapter describes how to configure WAN settings from the WAN screens. Use these screens to
configure your ZyXEL Device for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the
Internet. It connects your private networks (such as a LAN (Local Area Network) and other
networks, so that a computer in one location can communicate with computers in other locations.
Figure 27 LAN and WAN
LAN

6.1.1 What You Can Do in the WAN Screens

• Use the Internet Access Setup screen
on the ZyXEL Device for Internet access.
• Use the More Connections screen
access connections.

6.1.2 What You Need to Know About WAN

Encapsulation Method
Encapsulation is used to include data from an upper layer protocol into a lower layer protocol. To set
up a WAN connection to the Internet, you need to use the same encapsulation method used by your
ISP (Internet Service Provider). If your ISP offers a dial-up Internet connection using PPPoE (PPP
over Ethernet) or PPPoA, they should also provide a username and password (and service name)
for user authentication.
WAN IP Address
The WAN IP address is an IP address for the ZyXEL Device, which makes it accessible from an
outside network. It is used by the ZyXEL Device to communicate with other devices in other
ADSL Router Series User's Guide
C
H A PT ER
WAN
(Section 6.2 on page
(Section 6.3 on page 100) to set up additional Internet

WAN Setup

95) to configure the WAN settings
6
93