Configuring Snmp; The Dns Screen - ZyXEL Communications P-660H-61 User Manual

18.5.1 Configuring SNMP

To change your ZyXEL Device's SNMP settings, click Advanced > Remote MGMT > SNMP tab.
The screen appears as shown.
Figure 114 Advanced > Remote MGMT > SNMP
The following table describes the labels in this screen.
Table 84 Advanced > Remote MGMT > SNMP
LABEL
Server Port
Server Access
Secured Client IP
Address
Get Community
Set Community
Apply
Cancel

18.6 The DNS Screen

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice
versa.
ADSL Router Series User's Guide
DESCRIPTION
This displays the port the SNMP agent listens on. If the number is grayed out, it is not
editable.
Select the interface(s) through which a computer may access the ZyXEL Device using this
service.
A secured client is a "trusted" computer that is allowed to access the SNMP agent on the
ZyXEL Device.
Select All to allow any computer to access the SNMP agent.
Choose Selected to just allow the computer with the IP address that you specify to
access the SNMP agent.
Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
Enter the Set community, which is the password for incoming Set requests from the
management station. The default is public and allows all requests.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 18 Remote Management
225