Configuring More Connections Advanced Setup - ZyXEL Communications P-660HN-T1H User Manual

Chapter 6 WAN Setup
Table 19 Network > WAN > More Connections: Edit (continued)
LABEL
ENET ENCAP
Gateway
Connection
Nailed-Up Connection
Connect on Demand
Max Idle Timeout
NAT
Back
Apply
Cancel
Advanced Setup

6.3.2 Configuring More Connections Advanced Setup

Use this screen to edit your ZyXEL Device's advanced WAN settings. Click the
Advanced Setup button in the More Connections Edit screen. The screen
appears as shown.
Figure 33 Network > WAN > More Connections: Edit: Advanced Setup
80
DESCRIPTION
This option is available if you select ENET ENCAP in the
Encapsulation field.
Specify a gateway IP address (supplied by your ISP).
Select Nailed-Up Connection when you want your connection
up all the time. The ZyXEL Device will try to bring up the
connection automatically if it is disconnected.
Select Connect on Demand when you don't want the connection
up all the time and specify an idle time-out in the Max Idle
Timeout field.
Specify an idle time-out in the Max Idle Timeout field when you
select Connect on Demand. The default setting is 0, which
means the Internet session will not timeout.
SUA only is available only when you select Routing in the Mode
field.
Select SUA Only if you have one public IP address and want to
use NAT. Click Edit Detail to go to the Port Forwarding screen
to edit a server mapping set.
Otherwise, select None to disable NAT.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to display the More Connections Advanced Setup
screen and edit more details of your WAN setup.
P-660HN-T1H User's Guide