Fujitsu ETERNUS DX80 S2 User Manual page 173

Appendix B Audit Log List
Event code
020B0004
020B0005
020B0006
020B0007
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Upper: Message
Lower: Detailed information
Set RADIUS
$a $b
[Function= Recovery= Pri_Server=
Pri_Port= $d Pri_Port_No= $e Pri_Authentication=
$g $h
Pri_Secret= Pri_Timeout=
Sec_Port= $j Sec_Port_No= $k
$l
Sec_Authentication= Sec_Secret=
$n
Sec_Timeout= ]
Set Syslog
$a $b
[Function1= Server1= Port1=
$e $f
Function2= Server2= Port2=
Set Audit
$a $b
[Audit= Function1= Server1=
Port_No1= $e Function2= $f Server2=
$i
Port_No2= ]
Set SED Key Machine Name
$a
[Machine_Name= ]
Copyright 2013 FUJITSU LIMITED
The RADIUS authentication settings are changed.
$a : RADIUS authentication (Enable, Disable)
$c
$b
: Recovery mode (Enable, Enable
$f
(Network), Disable)
$i
Sec_Server=
$c
: IP address or FQDN for the primary server
$d
: LAN port that is used by the primary server
$m
(MNT, RMT)
$e
: Port number for the primary server
$f : Authentication mode for the primary
server (CHAP, PAP)
$g : Common key with the primary server
$h
: Retry timeout value for the primary server
[sec] (10, 20, 30, 40, 50, 60)
$i
: IP address or FQDN for the secondary
server
$j : LAN port that is used by the secondary
server (MNT, RMT)
$k : Port number for the secondary server
$l
: Authentication mode for the secondary
server (CHAP, PAP)
$m
: Common key with the secondary server
$n
: Retry timeout value for the secondary
server [sec] (10, 20, 30, 40, 50, 60)
The syslog notification settings are changed.
$a
: Log sending function for syslog server 1
$c $d
Port_No1=
(RFC3164, RFC5424, Disable)
$g $h
Port_No2= ]
$b
: IP address for syslog server 1
$c : Port that is used by syslog server 1 (MNT,
RMT)
$d
: Port number for syslog server 1
$e
: Log sending function for syslog server 2
(RFC3164, RFC5424, Disable)
$f : IP address for syslog server 2
$g
: Port that is used by syslog server 2 (MNT,
RMT)
$h:
The audit log settings are changed.
$a:
$c $d
Port1=
$b
: Audit log function for syslog server 1
$g Port2= $h
(RFC3164, RFC5424, Disable)
$c
: IP address for syslog server 1
$d
: Port that is used by syslog server 1 (MNT,
RMT)
$e
: Port number for syslog server 1
$f : Log sending function for syslog server 2
(RFC3164, RFC5424, Disable)
$g
: IP address for syslog server 2
$h
: Port that is used by syslog server 2 (MNT,
RMT)
$i
: Port number for syslog server 2
The key management machine name is set.
$a:
173
Description
Port number for syslog server 2
Audit log function (Enable, Disable)
Key management machine name
P3AM-4842-12ENZ0