Fujitsu ETERNUS DX80 S2 User Manual page 157

Appendix B Audit Log List
No.
17 Role
18 Interface
19 IP address
20 Overview of audit
log
21 Detailed
information of
audit log
■ Message List
The table below shows the audit event code, audit event details, and output message for detailed audit log
information that are described in
• Note that some of the detailed information may not be displayed. The detailed information that is
displayed depends on the interface that is used and the processing contents.
• When multiple processing targets exist, the related display items are separated by "," (commas), and
displayed.
Event code
01010001
01010002
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Item
The user role is output.
If the user which performed the target event cannot be specified, no values are output.
A comma, and then a blank follow this item.
The interface that performed the target event process is output.
GUI: ETERNUS Web GUI
CLI: ETERNUS CLI
SOFT: Storage Foundation Software ETERNUS SF (including CLI and SLI-S for the
Storage Foundation Software ETERNUS SF)
If the interface that performed the target event cannot be specified, no values are
output.
A comma, and then a blank follow this item.
The IP address of the ETERNUS DX Disk storage system that performs the target event
process is output in IPv4 or IPv6 format:
•
IPv4
xxx.xxx.xxx.xxx
The IPv4 address is output based on the "IETF STD13, RFC 1035" specification.
•
IPv6
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
The IPv6 address is output based on the "RFC 4291" specification.
If the storage system that performs the target event cannot be specified, no values are
output.
A comma, and then a blank follow this item.
A message that indicates the event overview is output.
A comma, and then a blank follow this item.
Refer to "Message List" (page 157)
The detailed information of the event is displayed in text format and is enclosed by
brackets ("[" and "]").
If the event result is not "Success" or no detailed information exists for the audit event,
no values are output.
Refer to "Message List" (page 157)
"Audit Log Format" (page
Upper: Message
Lower: Detailed information
Login
Detail information is not displayed.
Logout
Detail information is not displayed.
Copyright 2013 FUJITSU LIMITED
Description
for details.
for details.
154).
Logged in to the storage system.
Logged out from the storage system.
157
Description
P3AM-4842-12ENZ0