Ending Calls - Polycom SoundPoint IP 450 User Manual

Note

Ending Calls

To answer an incoming call on a line configured for multiple Line Keys:
>> Do one of the following:
— Press
The first call is placed on hold and the second call become the active
call.
— Press or the Hold soft key to place the original call on hold.
Press the Answer soft key.
You can forward incoming calls by pressing the Forward soft key. For more
information, see Using Dynamic Forwarding
To answer an incoming call on a shared line:
1. Answer the incoming call.
2. Press or the Hold soft key.
Anyone on another phone configured to use the same shared line may
take the call by selecting the Line Key associated with the call on hold
(represented by a flashing red LED).
To end a call:
>> Do one of the following:
— If you are using the handset, press the EndCall soft key or replace the
handset.
— If you are using a headset, press
— If your are using the speakerphone, press
— Press the line key associated with the call (if this behaviour has been
configured by your system administrator)
— Press the
system administrator).
Using the Basic Features of Your Phone
next the flashing green indicator.
on page 28.
.
of the active call (if enabled by your
.
15