Polycom SoundPoint IP 450 User Guide
Forwarding Calls
Note
26
Performing a Blind Transfer
To perform a blind transfer:
During a call, press the Trnsfer soft key.
1
Press the Blind soft key.
2
Do one of the following steps:
3
— Enter the number to which you want to transfer the call.
— See
Placing Calls
At this point, the call is connected to the number to which you are
transferring them.
You can configure your phone so that all incoming calls are forwarded to
another party (see
Using Static
your phone rings (see
You can forward all incoming calls to another party while Do Not Disturb is
enabled on your phone. For more information, contact your system
administrator.
Call Forwarding is not available on shared lines.
This feature is local to the phone, and may be overridden by call server settings.
For more information, contact your system administrator.
on page 10.
Forwarding). You can also forward calls while
Using Dynamic
Forwarding).