About Your User Password; Locking And Unlocking Your Phone - Polycom SoundPoint IP 450 User Manual

Polycom SoundPoint IP 450 User Guide

About Your User Password

Note

Locking and Unlocking Your Phone

46
When your phone is locked:
• You can only make an outgoing call to a number from a list of configurable
authorized numbers.
• You have to enter a password to answer incoming calls.
• All keys and soft keys are disabled, except those that allow you to unlock
the phone, make and authorized call, or redial a number.
You unlock the phone by entering your user password. If your phone restarts
for any reason while it is locked, it will be locked when the phone starts up
again (unless your phone is configured to start up unlocked).
When your phone is locked, the 'This phone is locked' and 'Authorized calls
only' messages scroll on the status bar. Messages that were displayed before
the phone was locked do not display.
You are assigned a user password so you can answer calls from your locked
phone and unlock the phone. By default, your user password is 123. You can
change your user password at any time.
To change your user password, you need administrator privileges. For more
information, or if you forget your user password, see your system administrator.
By default, your user password is 123. Change your user password so it is
unique to your phone.
To change your user password:
Press
1
From the Password screen, enter the administrator password and press
2
the Enter soft key.
From the Advanced screen, select Change User Password.
3
From the Change User Password screen, enter your password
4
information and press the Enter key.
You can choose how you want your phone to handle incoming calls when it is
locked. If you set up your phone to allow incoming calls when it is locked (the
default setting), incoming calls will ring on your phone, and you can answer
, then select Settings > Advanced.