Ending Calls; Transferring Calls; Transfer A Call - Polycom VVX 450 Manual

Ending Calls:-

You can end active calls at any time, however, you must resume held calls before you can
end the call.
You can end an active call on your phone at any time.
1. Do one of the following
Place the handset on the cradle.

Press End Call.

In the Calls screen, highlight the call and press End Call


Transferring Calls:-

You can transfer active or held calls to another person using the following transfer types:
 Blind transfer—Transfers the call directly to another line without speaking with the
other party first.
 Consultative transfer—Enables you to speak with the other party before completing
the transfer.
Choose a Default Transfer Type - You can choose a default transfer type to use for all calls on
VVX 450 phone. When you choose a default transfer type, the phone uses the selected
transfer type for all calls. Consultative is the default transfer type.
1. Navigate to Settings > Basic > Preferences.
2. Select Default Transfer Type and choose a transfer type.
The selected transfer type is used for all calls.

Transfer a Call:-

You can transfer a call to another contact and choose the transfer type you want to use for
the call.
1. During a call, do one of the following
 Press Transfer
 Press and hold Transfer
For example, if Blind is the default, press and hold Transfer
transfer.
• Press Transfer > More and select Blind or Consultative.
Page | 4
to use the default transfer type.
to use the non-default transfer type.
T: 01672 552340 E: support@jpitsolutions.co.uk
Support hours: Mon- Fri 8:30am – 5pm
to perform a Consultative