Using A Headset; Enabling Headset Memory Mode - Polycom SoundPoint IP 450 User Manual

Polycom SoundPoint IP 450 User Guide

Using a Headset

Note

Enabling Headset Memory Mode

16
If you use a headset, you can set up your phone so that all calls use your
headset. You can also use the hookswitch button on your headset to place,
answer, and end calls.
If headsets are deployed in high static environments where users frequently
disconnect and re-connect the headset to the phone, it is possible that the phone
can be damaged by electrostatic discharge (ESD).
You should take precautions to avoid excessive static buildup in your environment.
This can include humidity control and removal of synthetic materials near the phone
location. Antistatic spray applied to carpets in the workplace can reduce the level of
static buildup.
This feature is especially useful for permanent or full-time headset users.
To enable Headset Memory Mode:
Press
1
Select Settings > Basic > Preferences > Headset > Headset Memory
2
Scroll to select Enabled, and then press the Select soft key.
3
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
To activate Headset Memory Mode:
>> Press twice.
The flashing headset icon on the screen or a flashing headset key indicates that
the headset mode is activated. Pressing
key to receive a call will now connect to your headset automatically.
.
or the Answer soft