Polycom SoundPoint IP 450 User Manual page 23

• Multiple Line Keys per line
If your phone is configured with multiple call appearances, see
Multiple Call Appearances
You can ignore incoming calls by pressing the Reject soft key (for private lines) or
the Silence soft key (for shared lines) or the Do Not Disturb key. The Do Not
Disturb mode stays active when the call ends and remains active until you press the
Do Not Disturb key again.
Note
You can forward incoming calls by pressing the Forward soft key. For more
information, see
When your phone is configured with a silent ring, press the ringing Line key or the
Answer soft key to answer the call. By default, if your handset is off-hook, the call is
routed to it. If your handset is on-hook, the call is routed to the speaker.
Answering When Not in Another Call
In all cases, the active call will appear on the screen showing call duration and
destination.
To answer a call using the handset:
>> Pick up the handset.
To answer a call using Hands-Free Speakerphone mode:
If 'Handsfree mode disabled' displays on the screen after you press the
speakerphone key, your system administrator has disabled the speakerphone on
your phone.
Note
>> Do one of the following:
— Press
— With the handset on-hook, press
flashing green status indicator).
— Press the Answer soft key.
on page 43 for instructions on how to answer a call.
Using Dynamic Forwarding
.
Using the Basic Features of Your Phone
on page 28.
(next to the
Supporting
13