Blade Installation - Casablanca C42GxxxL Owner's Manual

Step 10. Raise the Canopy over the Hanger Bracket.
Align the partially installed screws with the key slots
in the canopy.
Step 11. Twist the Canopy clockwise to secure.
Step 12. Install the third & fourth canopy screws in
the round holes on Canopy. Securely tighten all four
screws.
Step 13. Using both hands, push the Canopy Trim
ring up to the top of the Canopy.
Step 14. Twist the Canopy Trim ring clockwise to
secure it to the Canopy.
Blades (5)
Step 1. Attach a blade to a blade iron by first
pressing the blade onto the blade iron, then
attaching the blade using 3 blade screws and blade
washers as shown in Figure #1.
Step 2. Use a screwdriver, tighten securely by
hand only.
Step 3. Repeat steps for all five Blades.
Round
Hole
BLADE HARDWARE
Blade Screws
Blade Irons (5)

BLADE INSTALLATION

C
oLorado
Blade Washers
(16) (16)
Blade Screw
Blade Washer
Blade
Blade
Iron
FIGURE 1.
Keyhole Slot
Blade Iron
Screws (11)
5 Pre-Installed
13