Step 9. Attach each blade to a blade
holder securing it with the four steel
washers and blade screws provided.
Tighten securely by hand only.
Step 10. Attach each blade/blade holder
assembly to the motor.
Tighten securely by hand only.
SWITCH HOUSING MOUNT REINSTALLATION
Step 11. Reinstall the switch housing mount
removed in Step 8.
Tighten securely by hand only.
SWITCH HOUSING MOUNT
SHOULDER SCREW
5-32 X
REMOVED IN STEP 8
Note: Versa•Touch models
will have only a wire nut
capping the black and
white wires coming out of
the fan motor.
BLADE INSTALLATION
BLADE SCREW
(4 PER BLADE)
STEEL WASHER
(4 PER BLADE)
BLADE/BLADE HOLDER INSTALLATION
BLADE HOLDER
SCREW
(2 PER BLADE)
9
/
" (3)
32
™
A
URORA
BLADE
HOLDER
BLADE
7