Blade Installation - Casablanca Bungalow Owner's Manual

BLADE HARDWARE (not to scale)
Blades (4)
Blade and Bladeholder Assembly
Step 5. Attach a blade to the blade holder by fi rst pressing
the blade badge into the blade. Using the provided
screwdriver, secure the blade holder to the blade by using
four screws from Pack C. Tighten by hand only using the
provided screwdriver. Repeat for each additional blade.
Install Blade Assembly
Step 6. Using the provided screwdriver and two screws
from Pack D, attach the blade assembly to the motor as
shown. Repeat for each blade assembly.
NOTE: Be sure that the blade badge is facing
downward.
TIP: For balancing purposes, loosely install all four blades
to the motor before tightening the blade screws securely.

BLADE INSTALLATION

Bladeholders (4)
CAUTION:
Blade screws must be tightened securely before
operating the fan.
B
UNGALOW
Blade Screws (17)
Blade Badges (4) Bladeholder Screws (9)
™
Pack C:
Pack D:
7