Oce 3165 Operator's Manual page 67

Push the toner bottle into the fill hole (see figure 51).
6
The seal at the bottle's neck will automatically be pierced as it enters the toner
reservoir, allowing the toner to flow steadily out of the bottle.
[51] Placing the toner bottle into the fill hole
If necessary, tap the bottom of the bottle to empty it.
7
When the bottle is empty, remove it carefully.
8
Screw the top back onto the empty toner bottle. The empty bottle will be
9
collected next time the Océ service engineer visits.
If you have accidentally spilt some toner, refer to the safety data
Attention:
sheet for Océ toner in appendix A for information about disposal and
cleaning.
Close the cover of the toner reservoir and secure it using a coin or screwdriver.
10
Close the door.
11
Access the key operator system (see page 13).
12
Press the section button 'Machine'.
13
The 'Toner registration' function registers the number of bottles of toner used
over a certain period of time and is monitored by Océ service. You must
indicate that you added one bottle to update the registration.
[52] Toner registration
Maintenance 67