Restarting The Dac - Oce 3165 Operator's Manual

Restarting the DAC

If the DAC does not seems to function any more, you need to reboot it by
means of the 'Restart DAC' function. The DAC shuts down and will start
again automatically. Unfinished print jobs at shutdown time will be recovered.
[59] 'Restart DAC' function
Attention:
again.
Restarting the DAC
Access the key operator mode (see page 13).
1
Open the 'Printing' section and select 'DAC control'.
2
Press the 'Restart DAC' function button.
3
Press the start button to confirm.
4
Quit the key operator mode.
5
76 Océ 3165 Key Operator Manual
Do not attempt to reboot the DAC by switching it off and on