Defining The Reset Time For Settings - Oce 3165 Operator's Manual

Defining the reset time for settings
The reset time specifies the time before the copier will return to the default
settings on the operating panel. Once started, a timer keeps counting down as
long as no job is still active and there is no user interaction (such as pressing
buttons, opening doors or placement of originals). The timer starts again from
the initial value in response to each new action by the user.
The reset time is 60 seconds by factory default, but can be changed to any other
time between 10 seconds and 5 minutes.
When 'No reset' is selected, settings remain valid until a user explicitly resets
them by means of the correction button.
Changing the reset time for settings
Access the key operator system (see page 13).
1
Open the 'Machine' section.
2
In the 'Basic' subsection, press the function button 'Reset-time settings'.
3
[11] 'Reset-time settings' function
Use the arrow buttons to enter the required reset time (between 10 and 300
4
seconds), or select 'No reset'.
When ready, quit the key operator system.
5
22 Océ 3165 Key Operator Manual