Defining Copy Charges - Oce 3165 Operator's Manual

Defining copy charges
When the accounting system or an external copy charge device is used, each
copy made is registered (so that it can be re-charged, for example). In the
default setting, each copy will be charged as one copy unit. You can define
copy charges which deviate from the standard one unit:
Blank pages (any size) are not charged in the default setting, but this can be
changed so that they are charged as normal copies.
A3 and duplex copies can be charged as 1 or 2 copies.
2-sided copies can be charged as 1 or 2 copies.
If your external copy charge device has these options, there is no need to make
these selections on your copier, unless it is a device with a tariff signal.
[18] Functions related to copy charges

Defining copy charges

Access the key operator system (see page 13).
1
Open the 'Accounting' section and select 'Copy charges' settings.
2
Press the 'Charges per 2-sided copy' function button to change it to '1' or '2'
3
as required.
Press the 'Charges per A3 copy' function button to change it to '1' or '2' as
4
required.
Press the 'Charges for blank pages' function button to change it to 'No' or
5
'Yes' as required.
When ready, quit the key operator system.
6
Configuration management 31