Change The Default Reset Time - Oce 31x5e Maintenance Manual

Change the default reset time

Introduction
The reset time is the delay period between the last user operation and the return
to the default job settings (see 'Change or restore the default job settings' on
page 30).
A timer starts if the user presses a key, opens a door or places the originals.
When the reset time has expired, the Océ 31x5E returns to the default
operating mode and the default job settings are displayed. The user loses the
changed settings.
The default reset time is 60 seconds, but you can set any other time from 10
seconds up to 5 minutes. If no reset time is defined, the user can restore the
default settings using the correction key .
Before you begin
Enter the key operator system.
1.
Illustration
[16] Define the reset time
[16] Define the reset time
Changing the reset time
Activate the 'Machine' section.
1.
Open the 'Basic settings' card.
2.
Press the 'Reset time' function key.
3.
Press the arrow keys to adjust the reset time. Use the left arrow key
right arrow key
32 Océ 31x5E Configuration and Maintenance Manual
to decrease or increase in 10 second steps.
or the