Important Information - Panasonic KX-TDA100 Installation Manual

Important Information

WARNING
SAFETY REQUIREMENTS
For All Telephone Equipment
•
Do not install the product in any other way than described in relevant manuals.
•
For safety reasons, do not physically modify the product or any optional equipment.
•
The product may only be installed and serviced by qualified service personnel.
•
To prevent possible fire or electric shock, do not expose the product to rain or moisture.
•
Follow all warnings and instructions marked on the product.
•
Do not place the product on an unstable surface, as a fall may cause serious internal damage.
•
The product should only be connected to the type of electrical power supply specified on the product label.
If you are not sure of the type of power supply to your home, consult your dealer or local power company.
•
For safety purposes some products are equipped with an earthed plug. If you do not have an earthed outlet,
please have one installed. Do not bypass this safety feature by tampering with the plug.
•
Do not allow anything to rest on the power cord. Do not locate the product where the power cord may be
stepped on or tripped on.
•
To reduce the risk of fire or electric shock, do not overload wall outlets and extension cords.
•
To reduce the risk of electric shock, do not disassemble the product. Only qualified personnel should
service the product. Opening or removing covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock.
•
Unplug the product from the wall outlet and have it serviced by qualified service personnel in the following
cases:
a.
When the power supply cord or plug is damaged or frayed.
b.
If liquid has been spilled into the product.
c.
If the product has been exposed to rain or water.
d.
If the product does not operate according to the operating instructions. Adjust only the controls that are
explained in the operating instructions. Improper adjustment of other controls may result in damage
and may require service by a qualified technician to restore the product to normal operation.
e.
If the product has been dropped or the cabinet has been damaged.
f.
If product performance deteriorates.
For the PBX
•
If damage to the unit exposes any internal parts, disconnect the power supply cord immediately and return
the unit to your dealer.
•
Do not bundle cables that are connected to the PBX with the AC power cords of machines located
nearby.
Use protectors to prevent the cables from being stepped on. Failure to do so may cause fire or electric
shock.
•
Unplug this unit from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise. These
conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorised
Panasonic Factory Service Centre.
•
Danger of explosion exists if a battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by the battery manufacturer. Dispose of used batteries according to the
manufacturer's instructions.
•
Only use the wall-mounting equipment (anchor plugs, screws, metal bracket) included with the PBX.
SAVE THESE INSTRUCTIONS
Important Information
Installation Manual 7