Download  Print this page

Pri30 Card (kx-tda0290ce/kx-tda0290cj) - Panasonic KX-TDA100 Installation Manual

Hybrid ip-pbx.
Hide thumbs

Advertisement

2.4.9 PRI30 Card (KX-TDA0290CE/KX-TDA0290CJ)

2.4.9 PRI30 Card (KX-TDA0290CE/KX-TDA0290CJ)
Function
1-port ISDN Primary Rate Interface card (30B channels). EURO-ISDN/ETSI compliant.
LEDs
RJ45
To NT1 / Extension
To NT1/Extension
For BNC
Accessories and User-supplied Items
Accessories (included): Ferrite core ´ 1
User-supplied (not included): RJ45 or BNC connector
CAUTION
When connecting this optional service card to the trunk, connect through an NT1; do not connect to
the U interface of the trunk directly.
PRI ports are SELV ports and should only be connected to SELV services.
Notice
When connecting the RJ45 connector, attach the included ferrite core. Refer to "2.2.9 Attaching a Ferrite
Core".
Note
In some countries/areas, this optional service card must not be connected to the Public Switched
Telephone Network.
Use only 1 type of connector (RJ45 or BNC) for connection; RJ45 and BNC cannot be used
simultaneously.
This optional service card can be used for either trunk or extension connection, by setting the A/B
switch or using the connector with appropriate pin assignments.
To confirm the trunk connection, refer to "Confirming the Trunk Connection" in "2.14.1 Starting the
PBX".
96
Installation Manual
For RJ45
120Ω
120Ω
OR
75Ω
75Ω
BNC (TX)
BNC (RX)

Advertisement

Table of Contents

This manual is also suitable for:

Kx-tda200

Comments to this Manuals

Symbols: 0
Latest comments: