PS Termination
Confirm the following before cancelling the PS registration:
•
The PS is turned on.
•
The PS is within range.
[691]
ENTER
If "Rejected" or "Time out" is displayed
CLEAR
Press "CLEAR".
If the registration information is still stored in the PS
Using the KX-TD7684/KX-TD7694
Select "Cancel Base".
Select "Yes".
Using the KX-TD7680
Select "DELETE
SYSTEM".
C.Tone
Using the KX-TD7690
Select "DELETE
SYSTEM".
SEL
C.Tone
S1
Testing the Operation
Walk around the service area while having a conversation using a registered PS. If noise is frequent or
conversations disconnect, relocate the CSs or install an additional CS.
PS No.
001 to 128
YES
Press "YES".
(HOLD)
Select "Base 1-4".
C.Tone
Select the
desired item.
SEL
Select the
S1
desired item.
2.9.7 Connecting a Cell Station to the PBX
ENTER
To the PS
operation
END
below
Select "YES".
SEL
Select "YES".
S1
Installation Manual
205