Panasonic KX-TDA100 Installation Manual page 176

2.8.7 Connecting a Cell Station to the PBX
Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering the PS to a wrong PBX, a PIN for PS registration can be set to the PBX. Before registering
the PS to the PBX, enter the PIN set to the PBX into the PS. By doing so, the PS will only be registered to the
PBX with the matching PIN.
Note
•
By default, the PIN for PS registration is "1234" for both the PBX and PS. Therefore, the PS can be
registered to the PBX without setting the PIN.
•
The PIN for PS registration will only be used when registering the PS to the PBX. Therefore, during
normal operation after registration, even if there is more than 1 PBX with the same PIN near the PS,
the PS will not be inadvertently linked to a different PBX.
Setting the PIN for PBX
[692]
ENTER
Changing the Display Language of the PS
Using the KX-TCA155/KX-TCA255/KX-TCA256/KX-TCA355
Press POWER
for 2 seconds.
Select
"Select Language".
Using the KX-TD7590
Press POWER
for 5 seconds.
SELECT
Select the desired
language.
Using the KX-TD7580
Press POWER
for 2 seconds.
/
Select "Select
Language".
PS Termination
Confirm the following before cancelling the PS registration:
•
The PS is turned on.
176 Installation Manual
PIN for PS Registration
4 digits
1234
Select
"Setting Handset".
Select the desired
language.
F
Select
"DISPLAY SETTING".
SELECT
/
/
Select
"Setting Handset".
/
Select the desired
language.
ENTER
Select
"Display Option".
SELECT
/
Select
"LANGUAGE".
/
Select
"Display Option".
END
(HOLD)
SELECT
/