Floor Standing (Kx-Tda200 Only) - Panasonic KX-TDA100 Installation Manual

2.2.13 Floor Standing (KX-TDA200 Only)

CAUTION
•
Do not block the openings of the shelf. Allow space of at least 20 cm above and 10 cm at the sides of
the shelf.
•
Make sure that the surface behind the shelf is flat and free of obstacles, so that the openings on the
back of the shelf will not be blocked.
•
Make sure that the surface behind the shelf is not made of wood.
Notice
Be careful not to drop the shelf.
1.
Install 4 anchor plugs in the floor, using the metal bracket as a template. Fix the metal bracket with 4 screws
(A).
Anchor
Plug
2.
Remove the front cover of the shelf (refer to "2.2.3 Opening/Closing the Front Cover").
Screw (A)
TOP
Floor
2.2.13 Floor Standing (KX-TDA200 Only)
Metal Bracket
Hammer
Anchor
Plug
30 mm
8 mm
Screw (A)
Metal
Bracket
Installation Manual 69