Download  Print this page

Advertisement

2.9.5 Site Survey
2.
Measure the radio signal strength by moving towards and away from the CS.
a.
Move to the CS until the radio signal strength level becomes "12".
b.
Move away from the CS and identify the CS coverage area within which the radio signal strength level
is greater than "8". Draw the area on the map.
c.
Move away from the CS and identify the CS coverage area within which the radio signal strength level
is greater than "3". Draw the area on the map.
3.
Repeat steps 1 and 2 for other CSs, and relocate the CSs when necessary.
a.
Overlap adjacent CS coverage areas where the radio signal strength level is "8" by 5 m to 10 m.
194
Installation Manual
PS
CS no. 1
Radio Signal Strength Levels
Level: 00
Level: 01 to 02
Level: 03 to 07
Level: 08 to 10
Level: 11 to 12
CS no. 1
CS NO.1 LEVEL:12
CS NO.1 LEVEL:8
PS
PS
Out of range
Receives noise easily or disconnects
May receive noise
Good
Better
5 m to 10 m
CS NO.1 LEVEL:3
CS no. 2

Advertisement

Table of Contents

This manual is also suitable for:

Kx-tda200

Comments to this Manuals

Symbols: 0
Latest comments: