Download  Print this page

Advertisement

Registering the PS
The PS must be registered to the PBX before it can be used. Programming of both the PS and PBX is required.
A PT with multiline display (e.g., KX-T7636 6-line display) is required to perform the PBX system programming.
Note
For details about system programming using a PT, refer to "2.3.2 PT Programming" in the Feature
Guide, and "2.1 PT Programming" in the PT Programming Manual.
Entering the System Programming Mode
PT (Administrator Level)
PROGRAM/
PAUSE
PS (Using the KX-TD7684/KX-TD7694)
Press POWER
for 2 seconds.
If required
System Lock Password
4 digits
PS (Using the KX-TD7680)
FUNC
FUNC
Press POWER
for 2 seconds.
If required
System Lock Password
4 digits
PS (Using the KX-TD7690)
MENU
Press POWER
for 2 seconds.
If required
System Lock Password
4 digits
Note
means default value throughout this section.
System Password for Administrator—
#
for PT Programming
Select
"Setting Handset".
System Setting Menu
Select
"PS PROGRAM".
Select
S1
"PS PROGRAM".
ENTR
S1
= 1234
Select
"System Option".
Select
"SYSTEM SET".
System Setting Menu
SEL
Select
S1
"SYSTEM SETTING".
System Setting Menu
2.9.7 Connecting a Cell Station to the PBX
Programming No.
3 digits
SEL
S1
Installation Manual
201

Advertisement

Table of Contents

This manual is also suitable for:

Kx-tda200

Comments to this Manuals

Symbols: 0
Latest comments: