Transporting The Scanner - Epson FILMSCAN 200 User Manual

Transporting the scanner

1. If a film carrier or cartridge holder is loaded in the scanner, remove it
as described below.
c
Caution:
Transporting the scanner with the film carrier or cartridge holder
inside may result in equipment damage. Always remove the carrier
or holder before transporting.
If the film carrier is loaded in the scanner, remove the carrier by pulling
it straight out from the scanner.
If the film cartridge holder is loaded in the scanner, remove the cartridge
holder by clicking the Eject button in the EPSON TWAIN window.
Before removing the cartridge holder, see "Removing the Advanced
Photo System film cartridge holder" on page 5-17.
c
Caution:
Make sure the film is completely wound in the cartridge before
taking the cartridge out of the cartridge holder; otherwise you may
scratch or tear the film when you open the cartridge holder cover.
2. Disconnect the power cord and the interface cable.
3. Attach the protective materials you removed when unpacking the
scanner, and repack the scanner.
4. Keep the scanner level during transport.
A-3
Appendix
A