If you use Windows 3.1/NT 3.5x:
Double-click the EPSON Screen Calibration icon in the
EPSON Scanner program group.
If you use Macintosh:
Double-click the EPSON Screen Calibration icon in the
EPSON Calibration folder.
2. In the following window, move the slider to the right or left
until the shades of gray of the two sets of horizontal stripes
match.
Note:
View the screen from a slight distance. The gray stripes will not
perfectly blend together; the object is to make the different tones
match as much as possible.
3. Click OK to register the calibration setting.
The new settings are saved. You will not need to change the
screen calibration again so long as you continue to use the
same display.
Setting Up the Scanner Software
3
3-13