Epson FILMSCAN 200 User Manual page 40

For the SCSI interface model
If you connect the SCSI interface model, EPSON FilmScan
200 appears automatically. If it does not appear, see
Chapter 7, "Troubleshooting."
10. Make sure that the film carrier containing the 35 mm film is
loaded in the scanner, and that there are no obstructions
placed in the way of the slide path.
11. Click Test to check the connection. The scanner will slide
the film carrier forward and back, and then an image from
the film in the carrier appears if the connection is correct.
If no image appears, see Chapter 7, "Troubleshooting."
Note:
The test image may be dark when using negative film; this is
normal.
c
Caution:
Do not touch the carrier while testing is in progress;
otherwise damage may occur.
Setting Up the Scanner Software
3
3-7