Epson FILMSCAN 200 User Manual page 28

c
Caution:
Do not set the SCSI ID to an ID number that is already
assigned to another device; otherwise the computer, scanner,
and other devices will not function properly.
Setting the terminator switch
The scanner has a built-in terminator, which allows SCSI
devices to communicate properly with each other. You may
need to change the terminator switch setting according to
your computer system.
Note:
Do not use an external terminator.
The factory setting of the terminator switch is on. If the scanner
is in the middle of a daisy chain as shown below, turn the
terminator switch off.
computer
Connecting EPSON FilmScan 200 to Your Computer
scanner other SCSI device
2
2-7