Maintenance And Transportation; Cleaning The Scanner - Epson FILMSCAN 200 User Manual

Maintenance and Transportation

This section provides instructions for cleaning and transporting the
scanner.

Cleaning the scanner

To keep your scanner operating at its best, you should clean it thoroughly
several times a year.
Before cleaning, unplug the power cord, then clean the outer case with
mild detergent dissolved in water. If the scanner is stained with grease or
some other hard-to-remove material, use a small amount of glass cleaner
on a soft cloth.
c
Caution:
Do not use a hard or abrasive brush to clean it.
Never use alcohol, thinner, or a corrosive solvent to clean the
scanner. These chemicals can damage the scanner components as
well as the case.
Be careful not to spill liquid into the scanner mechanism or
electronic components. This could permanently damage the
mechanism and circuitry.
Do not spray lubricants inside the scanner.
w
Warning:
The scanner contains high voltage circuitry. Never attempt to
disassemble or repair the scanner yourself. Contact your dealer.
A-2
Appendix