Installing the Scanner Software in Your PC
After connecting the scanner to your computer, install the
Windows-based scanner software. It is included on the scanner
software CD-ROM shipped with your scanner. Your CD
includes EPSON TWAIN and TWAIN-compliant scanning
software. To install EPSON TWAIN in Windows 95, see the next
page. To install EPSON TWAIN in Windows 3.1x or NT 3.5x, see
page 3-8. To install EPSON TWAIN in Windows NT 4.0, see page
3-9. To install the software in your Macintosh, see page 3-10.
Note:
To install the application included on your CD, see the application
user's guide.
Preparing the scanner before installing EPSON TWAIN
Turn on the scanner and load the film carrier containing the
35 mm strip film or 35 mm slides. Make sure that the READY
light is on. You can test the connection after installing the
EPSON TWAIN. You can use the film carrrier for 35 mm strip
film or slides. To load the film carrier, see "Loading 35 mm
Negatives and Positives" or "Loading 35 mm Slides" in
Chapter 4.
Note:
Set the 35 mm strip film or slides in the carrier so that at least the
carrier's first frame is occupied, as shown below.
For 35 mm strip film
3-2
Setting Up the Scanner Software
For 35 mm slides