Specifying Settings For The Image In The Results Report (Mode 023) - Oce VarioLink 2221 User Manual

10

Specifying settings for the image in the results report (mode 023)

Specify whether or not an image of the transmitted document is added to the
results report.
Factory settings
Bit
Setting
Specifying settings
The shaded cells represent the factory settings. The page numbers on the
right refer to the descriptions of the corresponding functions.
Bit
7, 6, 5, 4
3
2, 1, 0
10-34
7 6 5 4 3 2 1 0
1 1 1 1 1 0 0 0 (HEX: F8)
Description Setting
----------------------- 1111
Specifies whether or 0
not an image of the
1
transmitted docu-
ment is added to the
results report.
----------------------- 000
Specifying management settings
Description
*Do not change these bits
when specifying settings
for this function.
Is not added
Is added
*Do not change these bits
when specifying settings
for this function.
VarioLink 2221/2821/3621
Page Refer-
ence
----------
----------
----------